Can Thompson’S Water Seal Be Tinted?

What happens if you don’t seal your deck?

However, choosing not to stain or paint the deck is simply a preference of the homeowner.

The effects that can occur due to a lack of treatment are aesthetic in nature.

After 6 months, the wood will start to lose its color and will begin to fade.

Ultimately it will fade to grey or silver..

Can I mix stain and Thompson’s Water sealer?

As long as it’s all oil based you should be able too. But if it’s a solid color stain it might turn a little transparent if mixed with the sealer..just give it a try on a scrap piece. Bingo. As long as they use the same solvents, it should be fine.

What is the longest lasting deck sealer?

Longest-Lasting Seal. Olympic Maximum Waterproofing Sealant. … Best Overall. Seal-Once Marine Premium Wood Sealer. … Easiest Application. Eco Advance Exterior Wood Waterproofer. … Best Value. Olympic Smartguard Concentrated Sealant. … Longest-Lasting Seal. … Best Overall. … Easiest Application. … Best Value.More items…

What happens if it rains after applying Thompson’s Water Seal?

If you get it applied before it rains, then it will seal wood. If it rains heavily, the product will dry cloudy on the surface but still work.

Should I use Thompson Water Seal on pressure treated wood?

Wolman RainCoat, made by one of the big names in pressure-treating, is a widely sold water repellent that is a good choice for use on pressure-treated wood, although it can also be used on other types of wood. … The directions for some, such as Thompson’s Water Seal, specify pressure-treated wood as a suitable use.

Can you put stain over sealer?

The key is to apply a thin base coat to partially seal the wood before wood staining. Sanding sealers, dewaxed shellac and wipe-on finishes will all do the trick. Some types of stain perform better than others on blotch-prone wood. … If the wood was sealed completely, it would be difficult to get any stain to stick.

How often should you apply Thompson’s Water Seal?

every one to three yearsApplying a sealer and/or stain typically is recommended every one to three years, depending on the finishing product, deck use, weather conditions, and sun exposure. All Thompson’s WaterSeal products are DIY-friendly, and most need only a single application on a clean, dry deck.

What temperature can you use Thompson’s Water Seal?

Be sure that both surface and air temperatures are above 50°F during application and remain above 40°F for 48 hours after application. Do not apply product if rain is forecasted within 24 hours of application.

Is staining the same as sealing?

A deck sealer is typically a clear or transparent finish that either penetrates into the wood or forms a clear film on top. … A deck stain has the same water-resistant qualities that a deck sealer does. A deck stain, however, has added pigment or tone, which gives the stain some color.

How many coats does Thompson’s Water Seal have?

2 coatsApply 2 coats using brush,roller or sprayer. note: Use at full strength.do not dilute. The second coat should be applied when the first coat has soaked in the surface. For best results do not leave the first coat to dry for more than 1 hour before applying the second coat.

Can you tint wood sealer?

Use pigment-based tint with water-based or oil-based wood stains. As a base, use a clear wood stain or a pre-tinted wood stain. Just make sure the pre-tinted stain is also pigment-based. Mix the tint thoroughly to add or deepen the color.

How long does Thompson’s Water Seal last?

Stains with more pigment will last longer, but show less of the natural wood grain. Transparent stain is guaranteed for three years, semi-transparent stain is guaranteed for four years, and the solid stain is guaranteed for five years.

Is Thompson Water Seal any good?

5.0 out of 5 stars Love Thompson’s Water Seal with the harvest gold color! Basically, it takes your weather worn fence and restores it back to almost new looking boards, plus protecting it from the elements. I used my spray gun to apply, and a little goes a long way. Obviously, you can use a brush to apply it as well.

Is it better to stain or seal a deck?

A: It’s really up to you. Just staining the deck will give you the color you want, although in high-traffic areas the stain could wear away quickly. … The advantage of this, they say, is the sealer provides additional protection against water and weather damage, while the stain helps reduce fading from UV rays.