Quick Answer: What Is The Best Way To Apply Thompson’S Water Seal To A Deck?

How long does Thompson’s Water Seal last?

10 yearsIf applied correctly, Water Seal will last up to 10 years.

This is dependent on conditions such as orientation of the wall and local climate..

How many coats of Thompson Water Seal do I need?

2 coatsApply 2 coats using brush,roller or sprayer. note: Use at full strength.do not dilute. The second coat should be applied when the first coat has soaked in the surface. For best results do not leave the first coat to dry for more than 1 hour before applying the second coat.

How do you prepare a deck for sealing?

DO repair, wash, and sand your deck before sealing. Then, wash the deck using a power-washer to scrub the surface clean. Allow to dry for 24 hours, then sand the surface with between a 60 to 150 grit sandpaper or sanding disk.

How often should you water seal a deck?

For most decks, sealing once each year is a good rule of thumb. Depending on the condition of your deck this can be adjusted, but keep in mind that you should never go beyond three years maximum before re-sealing and staining.

Can you spray Thompson’s Water Seal on a deck?

Thompson’s WaterSeal includes a complete line of deck sealers and stains for protecting deck wood from moisture and sunlight. … You can apply some products with a garden sprayer or paint roller, but for classic deck stain, a paint pad on an extension pole is best.

How much does Thompson’s Water Seal Cover per gallon?

That determines how many gallons of stain are required (each gallon covers up to 400 square feet). You can buy it and be on your way. Thanks to its pigment-suspension technology, there’s no need to wait for the Waterpoofing Stain to have its turn in the paint shaker.

Can you use a sprayer to seal a deck?

You can even use a garden sprayer to apply the sealant. No fuss, no muss. It’s the quickest and cleanest way to get sealer down on the main surface deck, but it offers the least control for application in those hard to reach areas. Remember to cover nearby foliage to protect them getting sprayed with sealant.

Can you put Thompson Water Seal on treated wood?

Wolman RainCoat, made by one of the big names in pressure-treating, is a widely sold water repellent that is a good choice for use on pressure-treated wood, although it can also be used on other types of wood. … The directions for some, such as Thompson’s Water Seal, specify pressure-treated wood as a suitable use.

What does Thompson’s Water Seal do?

Thompson’s WaterSeal makes it easy to protect the outdoor space you love. Our innovative one-coat formula is quick and easy to use, and even cleans up with soap and water. … Thompson’s WaterSeal is waterproofing for your decks, fences, outdoor furniture and exterior wood made simple.

What happens if it rains after applying Thompson’s Water Seal?

Rain will damage the finish of any wet sealer with linseed oil or mineral oil in it. Because it forms a coating, it takes several hours to “set up” (dry) and during that time the sealer is vulnerable. If the surface dried enough to touch and the rain was gentle, you may find no problem at all.

Can I leave my deck untreated?

It may be many years before an untreated deck becomes completely unusable. However, a deck that is properly sealed and maintained with a yearly maintenance program consistently outlive a deck that is left to its own devices by a significant margin.

Is it better to stain or seal a deck?

A: It’s really up to you. Just staining the deck will give you the color you want, although in high-traffic areas the stain could wear away quickly. … The advantage of this, they say, is the sealer provides additional protection against water and weather damage, while the stain helps reduce fading from UV rays.

What is the best wood deck sealer?

Best Deck SealersThompsons Waterseal Advanced Natural Wood Protector.ECO-SAFE Wood Treatment – Stain & Preservation by Tall Earth.Rust-Oleum Coppercoat Wood Preservative.CabotStain Australian Timber Oil Penetrating Oil.Thompsons Waterseal – Transparent Stain.DEFY Crystal Clear Composite Deck Waterproofing Sealer.

What is the best sealant for pressure treated wood?

Best Outdoor Wood Sealers in September, 2020Wood sealer1Thompsons WaterSeal Editor’s ChoiceCheck Price2Rainguard SealerCheck Price3Thompsons WaterSeal Wood ProtectorCheck Price4Agra Life Lumber-SealCheck Price9 more rows•Apr 27, 2020

What is the longest lasting deck sealer?

Our Top PicksBEST OVERALL: SEAL-ONCE MARINE Penetrating Wood Sealer. … EASIEST APPLICATION: Eco Advance Exterior Wood Water Repellent. … BEST VALUE: Olympic Stain Smartguard Concentrated Sealant. … LONGEST-LASTING SEAL: Olympic Stain Maximum Waterproofing Sealant.

How do you apply sealer to a wood deck?

Apply the deck sealer with a natural bristle brush. A roller is faster, but brushing helps force the sealer into open pores and grain. Make sure to get the sealer into joints where two boards butt together. Apply the deck sealer to three or four boards at once, working their entire length.

Is Thompson’s Water Seal any good?

5.0 out of 5 stars Love Thompson’s Water Seal with the harvest gold color! Basically, it takes your weather worn fence and restores it back to almost new looking boards, plus protecting it from the elements. I used my spray gun to apply, and a little goes a long way. Obviously, you can use a brush to apply it as well.